CFRTP-SPFC980Y 이종소재 접합부 기계적 특성 평가Evaluation of Mechanical Characteristic for CFRTP/SPFC980Y Dissimilar joint
- Other Titles
- Evaluation of Mechanical Characteristic for CFRTP/SPFC980Y Dissimilar joint
- Authors
- 이태현; 오제훈; 감동혁
- Issue Date
- Oct-2020
- Publisher
- 대한용접접합학회
- Keywords
- CFRTP; SPFC980Y; Bolt/Nut; Self-Piercing Rivet; Adhesive; Hybrid joint
- Citation
- 대한용접접합학회지, v.38, no.5, pp.435 - 440
- Indexed
- KCI
- Journal Title
- 대한용접접합학회지
- Volume
- 38
- Number
- 5
- Start Page
- 435
- End Page
- 440
- URI
- https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/1581
- DOI
- 10.5781/JWJ.2020.38.5.2
- ISSN
- 2466-2232
- Abstract
- In this study, the mechanical characteristics of CFRTP/SPFC980Y dissimilar joints were evaluated. Bolt/nut, SPR (Self Piercing Rivet), and hybrid (bolt/nut & adhesive) joining were selected to evaluate joint properties. In the bolt/nut joining case, the effect of washer application in the joint behavior was observed, and the tightening torque was optimized. In SPR joining, CFRTP and SPFC980Y lacked formability, so SPR joining was possible by applying the additional sheet. For hybrid (bolt/nut & adhesive) joining, cause the bolt's preload, the tensile shear load was lower than the applied adhesive joint. Nevertheless, the highest toughness was obtained in the hybrid joint due to the stress distribution effect by adhesive.
- Files in This Item
-
Go to Link
- Appears in
Collections - COLLEGE OF ENGINEERING SCIENCES > DEPARTMENT OF MECHANICAL ENGINEERING > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.