IPA 저온 접합법을 이용한 PMMA micro CE chip의 제작Fabrication of PMMA micro CE chip using IPA assisted low-temperature bonding
- Other Titles
- Fabrication of PMMA micro CE chip using IPA assisted low-temperature bonding
- Authors
- 차남구; 박창화; 임현우; 조민수; 박진구
- Issue Date
- Feb-2006
- Publisher
- 한국재료학회
- Keywords
- Hot Embossing; PMMA (polymethylmethacrylate); Capillary Electrophoresis; Plastic Chip; Thermal Bonding; IPA (isopropyl alcohol)
- Citation
- 한국재료학회지, v.16, no.2, pp.99 - 105
- Indexed
- KCI
- Journal Title
- 한국재료학회지
- Volume
- 16
- Number
- 2
- Start Page
- 99
- End Page
- 105
- URI
- https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/45288
- DOI
- 10.3740/MRSK.2006.16.2.099
- ISSN
- 1225-0562
- Abstract
- This paper reports an improved bonding method using the IPA (isopropyl alcohol) assisted low-temperature bonding process for the PMMA (polymethylmethacrylate) micro CE (capillary electrophoresis) chip. There is a problem about channel deformations during the conventional processes such as thermal bonding and solvent bonding methods. The bonding test using an IPA showed good results without channel deformations over 4 inch PMMA wafer at 60 oC, 1.3 bar for 10 minutes. The mechanism of IPA bonding was attibuted to the formation of a small amount of vaporized acetone made from the oxidized IPA which allows to solvent bonding. To verify the usefulness of the IPA assisted low-temperature bonding process, the PMMA micro CE chip which had a 45 μm channel height was fabricated by hot embossing process. A functional test of the fabricated CE chip was demonstrated by separation of fluorescein and dichlorofluorescein. Any leakage of liquids did not found during the test and the electropherogram result was successfully achieved. An IPA assisted low-temperature bonding process could be an easy and effective way to fabricate the PMMA micro CE chip and would help to increase the yield.
- Files in This Item
-
Go to Link
- Appears in
Collections - COLLEGE OF ENGINEERING SCIENCES > DEPARTMENT OF MATERIALS SCIENCE AND CHEMICAL ENGINEERING > 1. Journal Articles
![qrcode](https://api.qrserver.com/v1/create-qr-code/?size=55x55&data=https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/45288)
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.