Plasma-enhanced atomic layer deposition of tantalum nitride thin films using tertiary-amylimido-tris(dimethylamido)tantalum and hydrogen plasma
- Authors
- Lee, Ha-Jin; Park, Jin-Seong; Kwon, Se-Hun
- Issue Date
- Jun-2016
- Publisher
- SPRINGER
- Keywords
- Tantalum nitride thin films; Plasma-enhanced atomic layer deposition; Preferred orientation; Microstructure; Copper diffusion barrier
- Citation
- JOURNAL OF ELECTROCERAMICS, v.36, no.1-4, pp.165 - 169
- Indexed
- SCIE
SCOPUS
- Journal Title
- JOURNAL OF ELECTROCERAMICS
- Volume
- 36
- Number
- 1-4
- Start Page
- 165
- End Page
- 169
- URI
- https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/23013
- DOI
- 10.1007/s10832-016-0015-4
- ISSN
- 1385-3449
- Abstract
- Plasma-enhanced atomic layer deposition (PEALD) of tantalum nitride (TaN) thin films was investigated at a growth temperature of 230 A degrees C using an alternating supply of tertiary-amylimido-tris(dimethylamido)tantalum (TAIMATA, Ta[NC(CH3)(2)C2H5][N(CH3)(2)](3)) and hydrogen (H-2) plasma. As the H-2 plasma power increased from 75 to 175 W, the electrical resistivity of the films was improved from 1900 to 680 mu a"broken vertical bar center dot cm, mainly due to the improved crystallinity. Moreover, the preferred orientation ratio between TaN (200) and TaN (111) planes also abruptly increased from 0.8 to 2.8 with increasing the H-2 plasma power. This preferred orientation change of the films from (111) to (200) improves the adhesion properties between Cu and TaN, while the Cu diffusion barrier performance was not significantly affected.
- Files in This Item
-
Go to Link
- Appears in
Collections - 서울 공과대학 > 서울 신소재공학부 > 1. Journal Articles
![qrcode](https://api.qrserver.com/v1/create-qr-code/?size=55x55&data=https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/23013)
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.