ScholarWorks@Soongsil University

International Journal of Precision Engineering and Manufacturing

Journal Title

  • International Journal of Precision Engineering and Manufacturing

ISSN

  • E 2005-4602 | P 2234-7593 | 2234-7593 | 2005-4602

Publisher

  • 한국정밀공학회
  • Korean Society for Precision Engineering

Listed on(Coverage)

JCR2011-2019
SCIE2012-2021
KCI(Ranking)2012-2019
KCI2006-2021
KCI(Candidate)2003-2005

Active

  • Active

    based on the information

    • JCR;KCI(Ranking);SCIE;KCI;

Country

  • SOUTH KOREA

Article List

1 - 20 out of 27 results.

Three-Phase Coil Configurations for the Radial Suspension of a Bearingless Slice Motor

Ahn, H.-J.; Vo, N.V.; Jin, S.

ArticleIssue Date2023CitationInternational Journal of Precision Engineering and Manufacturing, v.24, no.1, pp.95 - 102PublisherSpringerOpen
Fabrication Methods for Microscale 3D Structures on Silicon CarbideGo to Link

Cho, Younghak; Hwang, Jihong; Park, Min-Soo; Kim, Bo Hyun

ArticleIssue Date2022CitationINTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.23, no.12, pp.1477 - 1502PublisherKOREAN SOC PRECISION ENG
Kerosene Supply Effect on Performance of Aluminum Nitride Micro-Electrical Discharge Machiningopen access

Kim, Daenyoung; Kim, Yoo-Seok; Song, Ki Young; Ahn, Sung Hoon; Chu, Chong Nam

ArticleIssue Date2022CitationINTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.23, no.6, pp.581 - 591PublisherKOREAN SOC PRECISION ENG
Rigid Precision Reducers for Machining Industrial Robots

Pham, Anh-Duc; Ahn, Hyeong-Joon

ArticleIssue Date2021CitationINTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.22, no.8, pp.1469 - 1486PublisherKOREAN SOC PRECISION ENG
Impact Analysis of Tolerance and Contact Friction on a RV Reducer using FE Method

Ahn, Hyeong-Joon; Choi, Byeong Min; Lee, Young Hwan; Pham, Anh-Duc

ArticleIssue Date2021CitationINTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.22, no.7, pp.1285 - 1292PublisherKOREAN SOC PRECISION ENG
Data-Driven Self-sensing Technique for Active Magnetic Bearing

Yoo, Seong Jong; Kim, Sinyoung; Cho, Kwang-Hwi; Ahn, Hyeong-Joon

ArticleIssue Date2021CitationINTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.22, no.6, pp.1031 - 1038PublisherKOREAN SOC PRECISION ENG
Experimental Investigation on CO2 Laser-Assisted Micro-Grinding Characteristics of Al2O3

Kwon, Wooyong; Kim, Taekyum; Song, Ki Young

ArticleIssue Date2021CitationINTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.22, no.1, pp.51 - 62PublisherKOREAN SOC PRECISION ENG
Software-Based Integral Product Architecture for Modular Motion Control System of a RFC Linear Motor Motion Stage: Model-Based DOB for Residual Vibration Suppression

Yoo, Seong Jong; Ahn, Hyeong-Joon

ArticleIssue Date2020CitationINTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.21, no.2, pp.203 - 209PublisherKOREAN SOC PRECISION ENG
Microchannel fabrication on glass materials for microfluidic devicesGo to Link

황지홍; 조영학; 박민수; 김보현

ArticleIssue Date2019CitationInternational Journal of Precision Engineering and Manufacturing, v.20, no.3, pp.479 - 495Publisher한국정밀공학회
A Passive RFC (Reaction Force Compensation) Mechanism Using Adjustable Piecewise Linear Stiffness of Pre-Compressed Springs

Kim-Duc Hoang; Ahn, Hyeong-Joon

ArticleIssue Date2018CitationINTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.19, no.9, pp.1317 - 1322PublisherKOREAN SOC PRECISION ENG
Hysteresis Curve Analysis of a Cycloid Reducer Using Non-Linear Spring with a Dead Zone

Pham, Anh Duc; Tran, The Linh; Ahn, Hyeong-Joon

ArticleIssue Date2017CitationINTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.18, no.3, pp.375 - 380PublisherKOREAN SOC PRECISION ENG
Characterization of thin film solid oxide fuel cells with variations in the thickness of nickel oxide-gadolinia doped ceria anodeGo to Link

박태현; 김유성; 노승탁; 조구영; 이윤호; 유원종; 이예근; WAQAS HASSAN TANVEER; 차석원

ArticleIssue Date2016CitationINTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.17, no.8, pp.1079 - 1083PublisherKOREAN SOC PRECISION ENG
Lost motion analysis of one stage cycloid reducer considering tolerances

The Linh Tran; Anh Duc Pham; Ahn, Hyeong-Joon

ArticleIssue Date2016CitationINTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.17, no.8, pp.1009 - 1016PublisherKOREAN SOC PRECISION ENG
Semi-active reaction force compensation for a linear motor motion stage

Duc Canh Nguyen; Ahn, Hyeong-Joon

ArticleIssue Date2016CitationINTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.17, no.7, pp.857 - 862PublisherKOREAN SOC PRECISION ENG
Effect of Low Frequency Vibration on Micro EDM Drilling

Lee, Pyeong An; Kim, Younghan; Kim, Bo Hyun

ArticleIssue Date2015CitationINTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.16, no.13, pp.2617 - 2622PublisherKOREAN SOC PRECISION ENG
A Fuzzy-P controller of an active reaction force compensation (RFC) mechanism for a linear motor motion stage

Duc Canh Nguyen; Ahn, Hyeong-Joon

ArticleIssue Date2015CitationINTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.16, no.6, pp.1067 - 1074PublisherKOREAN SOC PRECISION ENG
Experimental Investigation of ECDM for Fabricating Micro Structures of Quartz

Khac-Ha Nguyen; Lee, Pyeong An; Kim, Bo Hyun

ArticleIssue Date2015CitationINTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.16, no.1, pp.5 - 12PublisherKOREAN SOC PRECISION ENG
Improvement of high-speed stability of an aerostatic bearing-rotor system using an active magnetic bearing

Jang, Hee-Do; Kim, Jongwon; Han, Dong-Chul; Jang, Dong-Young; Ahn, Hyeong-Joon

ArticleIssue Date2014CitationINTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.15, no.12, pp.2565 - 2572PublisherKOREAN SOC PRECISION ENG
Dynamic Analysis and Iterative Design of a Passive Reaction Force Compensation Device for a Linear Motor Motion Stage

Duc Canh Nguyen; Ahn, Hyeong Joon

ArticleIssue Date2014CitationINTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.15, no.11, pp.2367 - 2373PublisherKOREAN SOC PRECISION ENG
A passive reaction force compensation (RFC) mechanism for a linear motor motion stage

You, Yo-han; Ahn, Hyeong-Joon

ArticleIssue Date2014CitationINTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.15, no.5, pp.797 - 801PublisherKOREAN SOC PRECISION ENG
1 2
STATISTICS
Total View :7,846,541
Today View :804

RSS_1.0 RSS_2.0 ATOM_1.0

CONTACT US

Soongsil University Library 369 Sangdo-Ro, Dongjak-Gu, Seoul, Korea (06978)02-820-0733

COPYRIGHT ⓒ SOONGSIL UNIVERSITY, ALL RIGHTS RESERVED.

Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.

BROWSE

한국어